Connecting SCALANCE M-800 to WAN
1.1 Connecting M874 with the mobile wireless network
SCALANCE M-800 Getting Started
Getting Started, 06/2015, C79000-G8976-C337-04
27
Allow only a specific device HTTPS access
1. Click on "Security" > "Firewall" in the navigation area and on the "IP Rules" tab in the
content area.
2. Click "Create". A new entry is created in the table.
3. Configure the firewall rule for the created HTTPS service with the following settings:
To Device
192.168.100.20 (the required device)
Destination (Range) 0.0.0.0/0 (all addresses)
4. Click "Set Values".
To Next Page
Loading...
Need help?
General
