Connecting SCALANCE M-800 to WAN
1.3 Connecting M826 with SHDSL
SCALANCE M-800 Getting Started
76 Getting Started, 06/2015, C79000-G8976-C337-04
The SHDSL connection is set up. The devices negotiate the connection parameters. This
means that they use the transmission rate at which the data can be sent and received
reliably. You will find more detailed information on the connection in "Information" >
"SHDSL".
Figure 1-1 Overview of M826 in the master station
You can protect the data transfer additionally using the firewall and IPsec VPN.
To Next Page
Loading...
Need help?
General
