Siemens SCALANCE XF200 - Hazardous Area Safety

Safety notices
3.2 Safety notices for hazardous areas
SCALANCE X-200
Operating Instructions, 03/2015, C79000-G8976-C284-06
29
3.2
Safety notices for hazardous areas
Safety notices on use in hazardous areas
General safety notices relating to protection against explosion
WARNING
EXPLOSION HAZARD
DO NOT OPEN WHEN ENERGIZED.
Safety notices when using the device according to Hazardous Locations (HazLoc)
If you use the device under HazLoc conditions you must also keep to the following safety
notices in addition to the general safety notices for protection against explosion:
This equipment is suitable for use in Class I, Division 2, Groups A, B, C and D or non-
hazardous locations only.
This equipment is suitable for use in Class I, Zone 2, Group IIC or non-hazardous locations
only.