SCALANCE X-200
Operating Instructions, 03/2015, C79000-G8976-C284-06
59
Note
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.
Approvals for shipbuilding are not printed on the device type plate.
Current approvals on the Internet
You will also find the current approvals for the product on the Internet pages of Siemens
Industry Online Support under the following entry ID:
33118791 (http://support.automation.siemens.com/WW/view/en/33118791
)
→ "Entry list" tab, entry type "Certificates"
Approvals for SIMATIC NET products
You will find an overview of the approvals for SIMATIC NET products including approvals for
shipbuilding on the Internet pages of Siemens Industry Online Support under the following
entry ID:
57337426 (http://support.automation.siemens.com/WW/view/en/57337426
)
SIMATIC NET products meet the requirements and aims of the following EC directives.
EMC directive (electromagnetic compatibility)
The SIMATIC NET products described in these operating instructions meet the requirements
of EC directive 2004/108/EC "Electromagnetic Compatibility" for the following areas of
application:
To Next Page
Loading...
