Siemens SCALANCE XF200 - Single Mode Fiber-Optic Cable; POF and PCF Cables

Connecting up
5.5 Attachment to Industrial Ethernet
SCALANCE X-200
56 Operating Instructions, 03/2015, C79000-G8976-C284-06
5.5.2.2
Single mode fiber-optic cable
Transmission medium
The following X-200 IE switches use single mode fiber-optic cables as the transmission
medium:
● X204-2LD
● X204-2LD TS
● X206-1LD
● X212-2LD
Characteristics:
Transmission speed
100 Mbps
Transmission mode
100Base-FX according to IEEE 802.3
Connectors BFOC sockets
Wavelength
1310 nm
Core diameter 9 μm
Outer diameter
125 μm
Light source
LED
Maximum range (segment length)
26 km
Note
No autonegotiation
With optical transmission, the full duplex mode and transmission speed cannot be changed.
For this reason, the autonegotiation function cannot be selected.
5.5.2.3
POF and PCF cables
Transmission medium
The following X-200 IE switches use Plastic Optical Fiber (POF) or Polymer Cladded Fiber
(PCF) as the transmission medium:
● X200-4P IRT
● X201-3P IRT
● X201-3P IRT PRO
● X202-2P IRT
● X202-2P IRT PRO