Siemens SCALANCE XF200 - Page 61

Approvals
SCALANCE X-200
Operating Instructions, 03/2015, C79000-G8976-C284-06
61
II 3 (2) G Ex nA [op is] IIC T4
The IE switches SCALANCE X-200 listed below have additional approval according to
II 3 (2) G Ex nA [op is] IIC T4, certificate no.: DEKRA11ATEX0060 X:
• X204-2
• X204-2TS
• X204-2FM
• X206-1
• X212-2
• XF204-2
• XF206-1
• X202-2IRT
These products meet the requirements of the following standards:
● EN 60079-0
● EN 60079-15
● EN 60079-28
See also
16689636 (http://support.automation.siemens.com/WW/view/en/16689636)
IECEx
The SIMATIC NET products meet the requirements of explosion protection according to
IECEx.
IECEx classification:
Ex nA IIC T4 Gc
DEK 14.0025X
The products meet the requirements of the following standards:
● IEC 60079-15 (Explosive atmospheres - Part 15: Equipment protection by type of
protection "n")
● IEC 60079-0 (Explosive atmospheres - Part 0: Equipment - General requirements)
The current versions of the standards can be seen in the EU Declaration of Conformity.