Operation
5.3 Supporting software
PAC2200
Equipment Manual, 12/2019, L1V30415167B-03
57
5.3 Supporting software
5.3.1 powermanager
Using the powermanager energy management software, energy data of the PAC2200
measuring device can be acquired, monitored, evaluated, displayed and archived.
powermanager provides the following functions:
● Tree view of the customer's system (project tree)
● Measured value display with pre-defined user views
● Alarm management
● Demand curve
● Reporting, different report types (e.g. cost center report)
● Load monitoring of reaction plans
● Power peak analysis (available as of powermanager V3.0 SP1)
● Support of distributed plants (systems)
● Archiving system
● User administration
5.3.2 powerconfig
The powerconfig software is the combined commissioning and service tool for
communication-capable measuring devices and circuit breakers from the SENTRON family.
The PC-based tool facilitates parameterization of the devices, resulting in substantial time
savings, particularly when several devices have to be set up. Using powerconfig, measuring
devices from the 7KM PAC series can be parameterized and operated via various
communication interfaces, and measured values can be documented and monitored.
powerconfig provides the following functions:
● Parameterization, documentation, operation and monitoring in one software
● User-friendly documentation of measured values and settings
● Clear presentation of the available parameters including validity testing of the inputs
● Display of the available device statuses and measured values in standardized views
● Project-oriented storage of device data
● Consistent operation and usability
● Support of the various communication interfaces (Modbus RTU, Modbus TCP,
PROFIBUS, PROFINET)
● Updating of device firmware and loading of language packs (device-dependent)
To Next Page
Loading...
