Siemens SENTRON 7KM PAC2200 - Measurement Specifications; Power Supply Details; Measuring Accuracy Standards

PAC2200
Equipment Manual, 12/2019, L1V30415167B-03
83
Technical specifications
8
8.1 Technical specifications
Device configuration
● 1 optically isolated digital input
● 1 optically isolated digital output
● 1 Ethernet interface, for connecting and configuring to the PC or network (optional)
● 1 M-Bus connection for reading out the measured values (optional)
● 1 RS485 port for readout and configuration (optional)
Measurement
Only for connection to AC voltage systems
Measuring method
For voltage measurement
True root-mean-square measurement (TRMS)
For current measurement
True root-mean-square measurement (TRMS)
Measured value acquisition
Energy Contiguous (zero blind measuring)
Current, voltage Contiguous (zero blind measuring)
Waveform Sinusoidal or distorted
Frequency of the relative fundamental 50 / 60 Hz
(MID devices only 50 Hz)
Measured value acquisition mode
Automatic mains frequency acquisition