Siemens SENTRON 7KT PAC1600 - Keypad Functions

Description
3.3 Single-phase devices
7KT16 energy meter
Equipment Manual, 09/2020, 2514284147-04
27
For single-phase devices with an M-Bus interface
Code
Description
Default
Range
P-20
Primary address
001
001 … 250
P-21
Secondary address HIGH
Serial
number
0000 … 9999
P-22
Secondary address LOW
Serial
number
0000 … 9999
P-23
Baud rate
2400
• 300
• 600
• 1200
• 2400
• 4800
• 9600
• 19200
• 38400
Explanations about the code
P-20
Main address
P-21,
P
-22
Secondary address, 1st half (4 digits), 2nd half (4 digits).
The complete secondary address can be obtained by concatenating the contents of
parameter
P8.02 with P8.03.
Example:
Secondary address 12345678, set P8.02 = 1234 and P8.03 = 5678.