Siemens SENTRON 7KT PAC1600 - Three-Phase Devices 5 A

Description
3.4 Three-phase devices 80 A
7KT16 energy meter
40 Equipment Manual, 09/2020, 2514284147-04
P5-01
Defines the operating hours counter:
•
OFF = Hour counter deactivated. Nothing appears on the display.
•
ON =
The hour counter is incremented for as long as the energy meter measures
energy.
•
THR1 = The hour counter is incremented for as long as the limit threshold
defined by the parameters (P2-01 ... P2-06) is active.
•
THR2 = The hour counter is incremented for as long as the limit threshold
defined by the parameters (P3-01 … P3-06) is active.
•
INP = The hour counter is incremented for as long as the programmable input
is activated. Parameter P4.01 must be set to ON.
P5-02
Activates the calculation and display of power demand values and max. demand
values.
3.4.4.6 Programmable AC input
Three-phase devices have a programmable AC input.
This input is deactivated by default. Set parameter P5.01 to select the required function.
You can use the input as follows:
• For 2 different tariffs (T1 and T2) with independent energy meters
• For resetting partial counters, hour counters and demand values
• For activating hour counters
3.4.4.7 Settable values for parameters P2.01, P3.01, P4.01
Setup Unit of meas-
urement
Measured value
01
kW
Active power
1)
02
kW
Total active power
03
kW L1
Active power L1
04
kW L2
Active power L2
05
kW L3
Active power L3
06
kvar
Reactive power
1)
07
kvar
Reactive power
08
kvar L1
Reactive power L1
09
kvar L2
Reactive power L2
10
kvar L3
Reactive power L3
11
kVA
Apparent power
1)
12
kVA
Total apparent power
13
kvar L1
Apparent power L1
14
kvar L2
Apparent power L2
15
kvar L3
Apparent power L3
16
V L-n
Phase voltage
1)
17
V L1
Phase voltage L1N