Siemens SIMATIC CPU 1515SP PC2 F - Areas of application

CPU 1515SP PC2 (F/T/TF)
Operating Instructions, 09/2018, A5E42603425-AA
17
Areas of application
3
3.1
Areas of application of fail-safe CPUs
Areas of application
F-CPUs are mainly designed for personal and machine protection. In addition to the safety
program, you can also program standard applications. You can operate the F-CPUs in safety
mode or in standard mode.
Reference
Information on the use of F-CPUs in safety mode is available in the programming and
operating manual SIMATIC Safety - Configuring and Programming
(http://support.automation.siemens.com/WW/view/en/54110126
).
You can find information on using the CPU 1505SP (F) Software Controller in the associated
manual (https://support.industry.siemens.com/cs/ww/en/view/109740725
) and in the
F-product information (https://support.industry.siemens.com/cs/ww/en/view/109478599).
3.2
Areas of application of technology CPUs
Areas of application
Areas of application of T-CPUs are motion control applications such as gearing and
camming as well as control of kinematics. Due to the supported technology functions, the
S7-1500T CPUs are suitable for controlling packaging machines, converting applications,
assembly automation, etc.
You can operate the TF-CPUs in safety mode or in standard mode.
Reference
You can find information on using the T-CPUs in the function manual SIMATIC S7-1500T
Motion Control (http://support.automation.siemens.com/WW/view/en/109749263
).
You can find information on using the T-CPUs in the function manual SIMATIC S7-1500T
kinematics functions (http://support.automation.siemens.com/WW/view/en/109749264
).
You can find information on using the F-CPUs and TF-CPUs in safety mode in the product
information for SIMATIC S7-1200/S7-1500 F-CPUs
(http://support.automation.siemens.com/WW/view/en/109478599
).