CPU 1515SP PC2 (F/T/TF)
6 Operating Instructions, 09/2018, A5E42603425-AA
Purpose of the documentation
These operating instructions supplement the system manual
ET 200SP distributed I/O system. Functions that generally relate to the system are described
in this manual.
The information provided in these operating instructions and in the system/function manuals
supports you in commissioning the CPU 1515SP PC2.
The system must be operated and used by qualified staff only.
The following knowledge is required:
● Installation guideline for SIMATIC ET 200SP
● Totally Integrated Automation Portal, in particular:
– Hardware configuration with
hardware and network editor
– Communication between CPUs
● PC based automation with an S7-1500 software controller and with
WinCC Runtime Advanced
● Basic knowledge of fail-safe automation systems
● Basic knowledge of PC technology
● Windows 10 IoT Enterprise operating system (64-bit)
To Next Page
Loading...
