Siemens SIMATIC CPU 1515SP PC2 F User Manual

Application planning
5.3 Identification data
CPU 1515SP PC2 (F/T/TF)
30 Operating Instructions, 09/2018, A5E42603425-AA
WARNING
Electric shock and fire hazard from damaged device
A damaged device can carry dangerous voltage and trigger a fire in the machine or plant. A
damaged device has unpredictable properties and states.
Death or severe injury could occur.
Make sure that the damaged device is not installed and commissioned accidentally. Label
the damaged device correspondingly and keep it locked up. Have the device repaired
without delay.
5.3
Identification data
The identification data can be used to clearly identify the device when a repair is necessary.
Note the following data:
● Printed on the nameplate of the device, please find the following information:
– Article number
– Serial number
– The first and the last MAC address
● Depending on the scope of delivery, the "Certificate-of-License" is provided as proof of
license. This document is valid for the following product:
– S7-1500 Software Controller CPU 1505SP
– S7-1500 Software Controller CPU 1505SP F/T/TF
– WinCC Runtime Advanced V15
● The "Microsoft Windows Product Key" can be found on the "Certificate of Authenticity"
label.

Siemens SIMATIC CPU 1515SP PC2 F Specifications

General

Brand	Siemens
Model	SIMATIC CPU 1515SP PC2 F
Category	Control Unit
Language	English