Siemens SIMATIC CPU 1515SP PC2 F - Wiring

CPU 1515SP PC2 (F/T/TF)
36 Operating Instructions, 09/2018, A5E42603425-AA
Wiring
7
7.1
Notes on connection
Note
Rules and regulations for operation
Observe the information contained in the
Wiring section in the system manual ET 200SP
distributed I/O system (
http://support.automation.siemens.com/WW/view/en/84133942) and
in the function manual Designing interference
-free controllers function manual
(
http://support.automation.siemens.com/WW/view/en/59193566).
NOTICE
Risk of hazardous system states
If you remove and insert I/O devices with the supply voltage switched on, this can result in
hazardous system states.
Injury to persons and damage to the machine or plant could result.
Therefore, I/O devices can only be inserted and removed when the supply voltage is
switched off.
Only connect I/O devices which are suitable for use in industrial environments according to
EN 61000-6-2 / IEC 61000-6-2.