Siemens SIMATIC CPU 1515SP PC2 F - Characteristics

Product overview
4.2 Characteristics
CPU 1515SP PC2 (F/T/TF)
Operating Instructions, 09/2018, A5E42603425-AA
19
4.2
Characteristics
The CPU 1515SP PC2 is a PC-based automation device in the design of the ET 200SP. It is
used for control and visualization purposes. The supplied IPC DiagBase software provides
basic diagnostics functions and supports you in handling the BIOS.
General characteristics
● A removable CFast card with the following pre-installations is used as storage medium:
– Windows 10 IoT Enterprise operating system (64-bit)
– S7-1500 Software Controller CPU 1505SP, CPU 1505SP F, CPU 1505SP T,
CPU 1505SP TF
– Optionally with HMI: WinCC Runtime Advanced as of V15
● Interfaces:
– An interface for the exchangeable ET 200SP BusAdapters for connection of
PROFINET IO (2 ports) Accessories/spare parts (Page 123)
– An interface for connecting devices using Industrial Ethernet (Gigabit Ethernet)
– 4 interfaces for USB devices (2 x USB 3.0 and 2 x USB 2.0)
– A DisplayPort interface (DPP) for a monitor
– A sealable slot for the CFast card
– A slot for an SD/MMC card as additional optional drive
● Supply voltage 1L+ 24 V DC (SELV/PELV). The connection plug is included in the scope
of delivery.
● The CPU 1515SP PC2 is suitable for use in industrial environments:
– Compact design
– Fan-less operation
– High robustness
● The CPU 1515SP PC2 complies with IP 20 degree of protection and is intended for
installation in a control cabinet.
Additional information
You can find more information on the system versions and ordering options in the section
Scope of validity of the documentation (Page 6).