Siemens SIMATIC CPU 1515SP PC2 F - Page 62

Maintenance
11.3 Restoring the delivery state
CPU 1515SP PC2 (F/T/TF)
Operating Instructions, 09/2018, A5E42603425-AA
61
Restoring the delivery state of the CPU 1515SP PC2 with restore USB stick
Before the restore
1. Connect a monitor and a keyboard to the CPU.
2. Switch off the power supply of the CPU.
3. Remove all USB drives from the CPU.
4. Connect the restore USB stick to a USB port.
5. Switch on the power supply of the CPU.
→ The CPU is started.
6. Press <Esc> to start the Boot Manager.
7. Select the list entry for the USB stick in the Boot Manager.
8. After the prompt, confirm the start by pressing any key.
→ The loading process is displayed (Windows logo).
→ The SIMATIC Restore menu opens.
– Select a language.
– Select "CPU 1515SP PC2 (F/T/TF)" or "CPU 1515SP PC2 (F) + HMI".
– Select the option "Completely restore system drive".
→ The original software is restored on Partition C:, Partition D: is deleted.
After the restore
1. Exit the Restore menu.
2. Remove the restore USB stick.
3. Proceed as described in Initial commissioning.
Further procedure
● Re-connect any other required USB devices.
● Transfer the license keys.