Siemens SIMATIC ET 200pro - Page 81

Index
ET 200pro distributed I/O EtherNet/IP interface module
Manual, 03/2016, A5E32861915-AB
81
G
Galvanic isolation, 49
Gateway address, 36
Grouping electronic module data, 21
Grouping modules, 54
Automatic Configuration mode, 56
User-configured mode, 57
H
HeadParameters, 41
Host name, 37
Hot swapping, 24
I
I/O features, 15
I/O status byte, 20, 44
Identity Object, 29
IEC 61131, 67
Illustration
ET 200pro EtherNet/IP module, 15
Input current, 49
Insulation test, 74
Interface
support, 49
Interface capability flags, 35
Interface Control, 39
Interface control flags, 35
Interface speed, 39
Interface Speed, 39
Interface status, 35
IO_StatusEnable, 20, 23, 41
IP address, 36
L
LED status indicators, 17, 26
Link Status, 39
M
MAC address, 39
Major unrecoverable fault, 31
Manual Setting, 39
Marking for Australia and New Zealand, 67
McastConfig, 37
Mechanical environmental conditions, 72
Module replacement using QuickConnect, 63
ModuleReference, 45
Motor starters, 19
Mounting, 51
N
Negotiation Status, 39
Network mask, 36
Notes
byte boundaries, 55
Major Unrecoverable Fault, 31
modules exceeding byte limit, 55
O
Objects
Adapter, 41
Assembly, 32
Connection Manager, 34
Ethernet Link, 38
Identity, 29
Slot, 45
TCP/IP Interface, 35
Open Requests, 34
Operating modes, 19
Order number, 14
Outgoing module, 13
Overvoltage category, 74
P
Packing, 14
ParamByte, 46
ParamByte(n), 48
Parameter
channel-related diagnostics, 22
identifier-related diagnostics, 22
operation for ref. <> actual conf., 22
option handling, 23
submodule status, 22
Parameter assignment, 22
Parameter length
maximum, 14
ParameterSize, 45
Physical address, 39
Pollution degree, 74
Power loss, 49
Power module, 13
Power removal behavior, 21
Protection class, 74
Protocol
support, 49