Siemens SIMATIC ET 200pro - 7.3 Safety local maintenance isolating module (F-RSM)

ET 200pro distributed I/O EtherNet/IP interface module
Manual, 03/2016, A5E32861915-AB
80
A
Adapter Object, 41
AdapterStatus, 41
Address area, 49, 78
Address space, 14, 54
Approvals
CE, 66
CSA, 67
Assembly Object, 32
AutoConfig attribute, 41
Automatic Configuration mode, 19, 41
Autonegotiate, 40
B
Burst pulses, 69
Bus length, 14
Bus module, 12
C
CE
Approval, 66
Channel<n>Status, 47
Channel<n>Type, 48
ChannelStatus, 45
ChannelType, 46
Climatic environmental conditions, 71
Close Requests, 34
Coding element, 24
Commissioning, 58
ConfigByte, 45
ConfigChanged, 41
ConfiguredSlot, 41
Connecting, 52
Connection Manager Object, 34
Connection module, 13
Connection time, 59
Continuous shock, 73
Control Bits, 39, 40
CSA
Approval, 67
D
Definition
Electromagnetic compatibility, 69
Degree of protection IP65, 74
Degree of protection IP66, 74
Degree of protection IP67, 74
Device_State_Conflict, 47
Diagnostic String, 41
Diagnostics, 49
Dimension drawings, 77
Dimensions, 50
Distributed I/O systems, 9
Domain name, 36
Duplex mode, 39, 40
E
Electrical lock signal, 60
Electromagnetic compatibility, 69
Electrostatic discharge, 69
EMC, 69
Emission of radio interference, 70
ET 200pro distributed I/O system, 9
Ethernet Link Object, 38
EtherNet/IP standard, 67
F
Fault
communication, 25
configuration, 23
electronic modules, 23
hardware, 39
recoverable, 30
unrecoverable, 30
Faulty module replacement, 28
Features and benefits, 16
Firmware updates, 65
Forced Interface Speed, 40