ET 200SP Documentation Guide
F-TM ServoDrive
12 Equipment Manual, 02/2020, A5E47579503-AA
SINETPLAN
SINETPLAN, the Siemens Network Planner, supports you in planning automation systems
and networks based on PROFINET. The tool facilitates professional and predictive
dimensioning of your PROFINET installation as early as in the planning stage. In addition,
SINETPLAN supports you during network optimization and helps you to exploit network
resources optimally and to plan reserves. This helps to prevent problems in commissioning
or failures during productive operation even in advance of a planned operation. This
increases the availability of the production plant and helps improve operational safety.
The advantages at a glance
● Network optimization thanks to port-specific calculation of the network load
● Increased production availability thanks to online scan and verification of existing systems
● Transparency before commissioning through importing and simulation of existing STEP 7
projects
● Efficiency through securing existing investments in the long term and the optimal use of
resources
You can find SINETPLAN on the Internet (https://www.siemens.com/sinetplan
).
Safety Evaluation Tool (SET)
You can quickly and easily evaluate the safety functions of your machine using the Safety
Evaluation Tool (SET) for the IEC 62061 and ISO 13849-1 standards. You receive the
results as a standard-compliant report that can be integrated in the machine documentation
as proof of safety.
The free Safety Evaluation Tool is available on the Internet
(
https://new.siemens.com/global/en/products/automation/topic-areas/safety-
integrated/factory-automation/support/safety-evaluation-tool.html).
To Next Page
Loading...
Need help?
General
