Siemens SIMATIC ET 200SP F-TM

Safety functions integrated in the drive
5.3 System features
F-TM ServoDrive
Equipment Manual, 02/2020, A5E47579503-AA
47
5.2.5 Report completion
SI change tracking (Safety logbook)
Ensure that changes to the safety function (wiring) can be traced.
Countersignatures
Commissioning engineer
Professional execution of the above-stated tests and checks is confirmed.
Table 5- 6 Report completion - Countersignature of commissioning engineer
Date
Name
Company/Department
Signature
Machine manufacturer
The correctness of the parameter assignment documented above is confirmed.
Table 5- 7 Report completion - Countersignature of machine manufacturer
Date
Name
Company/Department
Signature
5.3 System features
5.3.1 Current information
Important note for maintaining the operational safety of your system:
NOTICE
Operational safety risk from unwanted motions
Systems with safety-
oriented variants are subject to special operational safety requirements
on the part of the operator. If information becomes known in the course of product
monitoring indicating insufficient product safety, this information will be disclosed in various
ways. For this reason, our website provides information on product developments and
features that are (or could be) relevant to operation of systems from a safety perspective.