Siemens simatic et200sp Function Manual

Circuit diagram example
4.3 Hardware and software components
Safety engineering with AS‑Interface in the SIMATIC ET 200SP, including typical circuit diagram
Function Manual, 08/2020, A5E44991382002A/RS-AB/002
29
4.3.3 Example of wiring
The wiring example is available for download in the Internet
(http://support.automation.siemens.com/WW/view/en/109769506) as a PDF and EPLAN
macro.
4.3.4 Sample data and projects
The following table contains all the files and projects used in this example.
Component
Note
E-Stop_SIL3_Protective_door_tumbler_SIL2_AS-i.zap15_1
TIA Portal project
Wiring_E-Stop_SIL3_Protective_door_tumbler_SIL2_AS-i.emp
EPLAN macro
E-Stop_SIL3_Protective_door_tumbler_SIL2_AS-i_de.set
SET file

Siemens simatic et200sp Specifications

General

Category	I/O Systems
Power Supply	24 V DC
Protection Rating	IP20
Number of Modules	Up to 64 modules
Mounting	DIN Rail
Communication Protocols	PROFINET, PROFIBUS
Storage Temperature	-40 °C to +70 °C
Digital Inputs	Yes (depending on module)
Digital Outputs	Yes (depending on module)
Analog Inputs	Yes (depending on module)
Analog Outputs	Yes (depending on module)
Modularity	Modular
Relative Humidity	5 to 95% (non-condensing)
Weight	Varies by configuration
System Type	Distributed I/O