Siemens simatic et200sp Function Manual

Legal information
1.1 Legal information
Safety engineering with AS‑Interface in the SIMATIC ET 200SP, including typical circuit diagram
6 Function Manual, 08/2020, A5E44991382002A/RS-AB/002
Additional notes:
Siemens reserves the right to make changes to these application examples at any time
without prior notice. In cases of discrepancies between the suggestions in the application
examples and other Siemens publications, such as catalogs, then the content of the other
documentation shall have precedence.
In addition to this, the Siemens terms and conditions of use
(https://support.industry.siemens.com) apply.
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens products and solutions represent only one component of such a
concept.
The customer is responsible for preventing unauthorized access to their plants, systems,
machines and networks. Systems, machines and components should only be connected to
the enterprise network or the Internet if, and to the extent, necessary and with appropriate
security measures (e.g. use of firewalls and network segmentation) in place.
In addition, Siemens' recommendations for appropriate protective measures should be
followed. Further information about industrial security can be found here
(https://www.siemens.com/industrialsecurity).
Siemens' products and solutions undergo continuous development to make them more
secure. Siemens expressly recommends that updates are carried out as soon as they become
available, and that only the current product version is used at all times. The use of product
versions that are no longer supported, and failure to apply the latest updates may increase
customer's exposure to cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed here (https://www.siemens.com/industrialsecurity).

Siemens simatic et200sp Specifications

General

Category	I/O Systems
Power Supply	24 V DC
Protection Rating	IP20
Number of Modules	Up to 64 modules
Mounting	DIN Rail
Communication Protocols	PROFINET, PROFIBUS
Storage Temperature	-40 °C to +70 °C
Digital Inputs	Yes (depending on module)
Digital Outputs	Yes (depending on module)
Analog Inputs	Yes (depending on module)
Analog Outputs	Yes (depending on module)
Modularity	Modular
Relative Humidity	5 to 95% (non-condensing)
Weight	Varies by configuration
System Type	Distributed I/O