7-1
FM 353 Stepper Drive Positioning Module
6ES7 353-1AH01-8BG0
Starting up
Chapter Overview
Section Section Header Page
7.1 Installation and wiring 7-2
7.2 Initial values for testing and optimization 7-3
7.3 Testing and optimization 7-7
Overview
This Chapter introduces you to the user interface for testing and start-up, and pro-
vides check lists for starting up the positioning module. The checklists will help
you:
S Check all steps until the module is running.
S Prevent malfunctions of the module once it is in operation.
You are guided through start-up of the machine axes.
7
To Next Page
Loading...
