Configuring with the WBM
6.3 The menu items of the WBM
SIMATIC RF360R
40 Configuration Manual, 03/2022, C79000-G8976-C629-02
Message area ④
The message area displays all WBM-related error messages and warnings (e.g. transfer
errors).
Operating the WBM via the keyboard
In addition to operating the WBM with the mouse, you can also control the interface
objects/text boxes using the keyboard:
• TAB
Jump to next interface object / text box
• SHIFT + TAB
Jump to the previous interface object / text box
Apart from manual entry of values, you can also change values in the text boxes with the
following buttons:
• Arrow up / down
The value is increased or decreased by one increment.
• PgUp / PgDn
The value is increased or decreased by ten increments.
• Home / End
The value is set to the minimum or maximum value.
6.3 The menu items of the WBM
6.3.1 The "Start page" menu item
The "Start page" menu item is divided into the following areas.
• Device-specific information
• Project ID
• Address information
• Device clock
• Configuration display
To Next Page