Connecting hardware
3.1 The PC adapter for SIMATIC RF-DIAG
SIMATIC RF-DIAG
12 Operating Manual, 09/2012, C79000-G8976-C292-01
3.1 The PC adapter for SIMATIC RF-DIAG
3.1.1 Description
PC adapter for SIMATIC RF-DIAG
① USB interface
② RS-422 – CM / wide-range power
supply unit
③ RS-422 – RF reader
The SIMATIC RF-DIAG product consists of a CD with software and documentation and a
hardware packet. The hardware packet consists of a PC adapter for SIMATIC RF-DIAG, a
USB connecting cable and an RS-422 cable.
The PC adapter for SIMATIC RF-DIAG is a converter from USB to RS-422. Communication
between the PC and reader can be established using the PC adapter.
Characteristics
● RS-422 to USB converter for communication with the RF620R and RF630R
● Dimensions without connecting cables: 101 x 63 x 35 mm
● CE-compliant (EU and UK versions)
● FCC-compliant for use in the USA and Canada
● Mechanically and electrically rugged design
● RS-422 interface
– With 24 VDC / 3 A for CM or wide-range power supply unit
– With 24 VDC / 3 A for reader
● Short-circuit proof
To Next Page
Loading...
