Siemens SIMATIC Ident User Manual

Operating the software
5.3 The tabs of the RF640R/RF670R readers
SIMATIC RF-DIAG
Operating Manual, 09/2012, C79000-G8976-C292-01
41
5.3.5 The "Tag Events" tab
Using the "Tag Events" tab, you can verify tag events quickly and simply.
Figure 5-5 The "Tag Events" tab
From the drop-down list, you can select the data source with which the recording will be
made.
Controlling recordings
Using the "Single", "Start", "Stop" and "Clear View", you can control the recording of the
events:
● Single setting
A single read of the selected data source is triggered and the measured values obtained
are displayed.
● Start
Any existing values from a previous recording are not deleted. A new recording is then
started. Reads of the selected data source are performed cyclically.

Siemens SIMATIC Ident Specifications

General

Brand	Siemens
Model	SIMATIC Ident
Category	Other
Language	English