Siemens SIMATIC IPC427C - Page 10

Product overview
2.1 Hardware configurations
SIMATIC IPC427C Bundles, SIMATIC HMI IPC477C Bundles
10 Manual, 07/2009, A5E02280126-02
● Software configurations:
– Windows Embedded, RTX
– Windows Embedded, HMI
– Windows Embedded, HMI/RTX
– Windows Embedded, RTX F
The SIMATIC IPC427C Bundles with WinAC RTX F are available with the following
configuration:
● Intel Core2Duo, PROFIBUS
● 2 GByte RAM
● 8 GByte CompactFlash
● WinAC RTX F + SIMATIC NET software preinstalled
SIMATIC HMI IPC477C Bundles
The SIMATIC HMI IPC477C Bundles are available the following configurations:
● Processor
– Celeron M with 1.2 GHz, PROFINET (RT); 2x1 GBit
– Celeron M with 1.2 GHz, PROFIBUS DP 12; 2x1 GBit
– Core2Solo with 1.2 GHz, PROFINET (RT); 2x1 GBit
– Core2Solo with 1.2 GHz, PROFIBUS DP 12; 2x1 GBit
– Core2Duo with 1.2 GHz, PROFINET (RT); 2x1 GBit
– Core2Duo with 1.2 GHz, PROFIBUS DP 12; 2x1 GBit
● RAM
– 1 GB
– 2 GB
– 4 GB
● Mass storage
If internal mass storage is available the operating system and programs are installed on
this internal mass storage.
– 2 GB CompactFlash (internal)
– 4 GB CompactFlash (internal)
– 8 GB CompactFlash (internal)
– 32 GB Solid-State-Disk (internal)
– 4 GB CompactFlash (exchangeable)
– 8 GB CompactFlash (exchangeable)
● Software configurations:
– Windows Embedded, RTX
– Windows Embedded, HMI
– Windows Embedded, HMI/RTX
– Windows Embedded, RTX F