SIMATIC IPC427C Bundles, SIMATIC HMI IPC477C Bundles
Manual, 07/2009, A5E02280126-02
13
Initial startup
3
3.1 Overview
Basic procedure
To proceed the initial startup follow these steps:
● First boot (Page 14): Follow the instructions on the screen.
● Touch screen calibration (Page 15): Calibrate the touch screen.
●
Your pre-configured
systems are available.
● Further software: Now you can install further software.
● Licensing (Page 23): Transfer the license key with the
Automation License Mana
ger.
In the following sections you will find detailed information on the steps involved during
the initial startup.
To Next Page
Loading...
Need help?
General
