Siemens SIMATIC IPC427C User Manual

SIMATIC IPC427C Bundles, SIMATIC HMI IPC477C Bundles
Manual, 07/2009, A5E02280126-02
5
Introduction
1
Purpose of the documentation
This documentation describes the unique features and pre-installed system configuration of
the following SIMATIC Embedded Bundles:
● SIMATIC IPC427C-HMI
● SIMATIC IPC427C-RTX
● SIMATIC IPC427C-HMI/RTX
● SIMATIC IPC427C-RTX F
● SIMATIC HMI IPC477C-HMI
● SIMATIC HMI IPC477C-RTX
● SIMATIC HMI IPC477C-HMI/RTX
● SIMATIC HMI IPC477C-RTX F
Definition
In this documentation, the following terms are used to specify the different pre-installed
system configuration of the following SIMATIC Embedded PCs:
● SIMATIC Embedded Bundles: This term is used to mean both PCs,
the SIMATIC IPC427C and the SIMATIC HMI IPC477C with all possible pre-installed
system configurations.
● SIMATIC IPC427C Bundles: This term is used to mean the PC alone with all its possible
pre-installed system configurations.
● SIMATIC HMI IPC477C Bundles: This term is used to mean the PC alone with all its
possible pre-installed system configurations.
● Windows Embedded: This term is used to mean the
"Windows Embedded Standard 2009" operating system.
● Distributed I/O: This term is used to mean PROFIBUS and PROFINET.
Target group
This documentation is intended for engineers, programmers, and maintenance personnel
with general knowledge of automation systems and programmable logic controllers.

Siemens SIMATIC IPC427C Specifications

General

Brand	Siemens
Model	SIMATIC IPC427C
Category	Industrial PC
Language	English