Technical specifications
8.7 BIOS description
SIMATIC IPC427E
Operating Instructions, 09/2017, A5E37454814-AB
125
Opening the BIOS selection menu
Procedure
1. Reset the device (warm or cold restart).
Depending on the device version, the default settings can differ from the figures shown.
The following message appears briefly on the display at the end of the self-test:
Press ESC for boot options
2. Press <ESC> to open the BIOS selection menu:
The following keys are available in the BIOS selection menu:
Exit selection menu, continue start sequence
Specify the boot media from which to boot:
• Hard disk drive
• USB drive
Start device manager for UEFI boot media
Boot from File: Start from an ".EFI" file
Configuration settings to start the device in Secure Boot mode. The only
software modules loaded are those that are known to be safe for the
BIOS or the operating system.
Start BIOS Setup via Setup Configuration Utility
Update BIOS from USB memory stick
Start Intel Management Engine BIOS Extension from Active Manage-
ment Technology Support (AMT)
1
Supported by Windows 8 and higher
General installation procedure (Page 81)
To Next Page
Loading...
Need help?
General
