Siemens SIMATIC IPC427E - Installing the Strain Relief

Installing and connecting the device
3.3 Connecting the device
SIMATIC IPC427E
Operating Instructions, 09/2017, A5E37454814-AB
43
3.3.8
Installing the strain relief
Strain relief for the device is provided in the scope of delivery.
Requirement
● 1 strain relief
● 2 screws
● 1 T10 screwdriver
Procedure
Installation
1.
Removed the indicate
d countersunk
screws and fasten the strain relief at the
indicated points.
Use the oval head screws included with
the strain relief.
Removal
Follow the steps for installation in reverse order.