Siemens SIMATIC IPC427E User Manual

Expanding and assigning parameters to the device
6.1 Installing and removing the memory module
SIMATIC IPC427E
Operating Instructions, 09/2017, A5E37454814-AB
65
Installation
1.
Insert the
memory module into the
marked slot at an incline with the contact
side facing the motherboard.
2.
Carefully press the memory module into
the contact strip until the latches engage.
The new memory configuration is detected automatically. The memory configuration is
displayed in the main BIOS Setup menu under "Total Memory".
After insertion and removal
Close the device.
The new memory capacity will be automatically detected and displayed in the BIOS setup
when the device is switched on.

Siemens SIMATIC IPC427E Specifications

General

Brand	Siemens
Model	SIMATIC IPC427E
Category	Industrial PC
Language	English