Device maintenance and repair
7.4 Installing the software
SIMATIC IPC427E
88 Operating Instructions, 09/2017, A5E37454814-AB
Procedure - Change system language
1. Connect the supplied USB stick to a free USB port of the device.
2. Restart the device and press "ESC" to access the BIOS.
3. Switch to the "Boot" menu and select the setting "USB Boot" = "Enabled".
4. Switch to the "Exit" menu and select "Exit Saving Changes".
5. Restart the device and press the "ESC" key and then enter the "Boot Manager" menu.
6. In the "Legacy USB" area, select the boot menu of the USB stock and press "Enter" to
boot from this.
7. Follow the instructions on the screen.
8. After selecting the menu dialog language, select the menu entry "Manage language
packages".
Depending on the current language setup, you have the following options in the "Manage
language packages" menu:
– Display language settings
– Install language
– Change language
– Uninstall installed language
To Next Page
Loading...
Need help?
General
