Device maintenance and repair
7.3 Service and spare parts
SIMATIC IPC547E
76 Operating Instructions, 02/2014, A5E32317120-AB
If you install or exchange system expansions and damage your device, the warranty
becomes void.
Electrostatic sensitive devices (ESD)
The device contains electronic components which are destroyed by electrostatic charges.
This can result in malfunctions and damage to the machine or plant.
Make sure you take precautionary measures even when you open the device, for example,
when opening device doors, device covers or the enclosure cover. For more information,
please refer to the chapter "ESD directives".
All technical specifications and approvals of the device only apply if you use expansion
components that have a valid CE approval (CE mark). The installation instructions for
expansion components in the associated documentation must be observed.
UL approval of the device only applies when the UL-approved components are used
according to their "Conditions of Acceptability".
We are not liable for functional limitations caused by the use of third-party devices or
components.
You can make repairs on the device with the following tools:
● T20 screwdriver for protective conductor connection and enclosure
● T6 screwdriver for removing and installing the DVD drive
● T10 screwdriver for all of the remaining screws
ESD guideline (Page 109)
Spare parts and repairs (http://support.automation.siemens.com/WW/view/en/16611927
)