Siemens SIMATIC IPC547E - 6.2 Remove the fan cover; 6.3 Open the device

Expanding and assigning parameters to the device
6.2 Remove the fan cover
SIMATIC IPC547E
62 Operating Instructions, 02/2014, A5E32317120-AB
6.2
Remove the fan cover
Requirement
● The front door is open, see "Opening the front door (Page 61)".
Procedure
1.
Press the marked at the same
time to release the fan cover.
2.
Open the fan cover in the
direction
of the arrow and remove the fan
cover.
6.3
Open the device
NOTICE
Malfunctions and electric shock through repair
Improper repairs jeopardize operational reliability and damage the device.
The results are personal injuries and damage to the plant.
Take the following precautions:
• Always disconnect the power plug before you open the device.
• Close the device after every repair.
CAUTION
Electrostatic sensitive devices (ESD)
The device contains electronic components which are destroyed by electrostatic charges.
This can result in malfunctions and damage to the machine or plant.
Take the appropriate precautions. Additional information is available in the section
"Switching off the device (Page 53)".