Siemens Simatic IPC647C User Manual

Technical specifications
14.1 General specifications
SIMATIC IPC647C
136 Operating Instructions, 12/2010, A5E02669337-02
General specifications
Immunity to RF interference 10 V/m, 80 to 1000 MHz and 1.4 to 2 GHz, 80% AM 1 kHz;
(to IEC 61000-4-3)
1 V/m 2 to 2.7 GHz, 80% AM 1 kHz (to IEC 61000-4-3)
10 V, 10 KHz to 80 MHz; 80% AM 1 kHz
(to IEC 61000-4-6)
Magnetic field 100 A/m, 50 Hz / 60 Hz (to IEC 61000-4-8)
Climatic conditions
Temperature Tested according to IEC 60068-2-2, IEC 60068-2-1,
IEC 60068-2-14
During operation
Gradient
+5 °C to +35 °C without restrictions
+5 °C to +45 °C no burner operation
+5 °C to +50 °C +
)
no ODD operation, no HDD operation in
removable rack
max. 20° C/h, no condensation
+)
Power dissipation of the expansion modules in total less
than 30 W
Storage/transport
Gradient
-20° C to +60° C
max. 20° C/h, no condensation
Relative humidity Tested according to IEC 60068-2-78, IEC 60068-2-30
During operation
Gradient
5 to 80% at 25° C (no condensation)
Max. 10° C/h no condensation
Storage/transport
Gradient
5 to 95% at 25° C (no condensation)
max. 20° C/h, no condensation
Atmospheric pressure
During operation 1080 to 795 hPa
(corresponds to an altitude of -1000 to 2000 m)
Storage/transport 1080 to 660 hPa
(corresponds to an altitude of -1000 to 3500 m)
Mech. ambient conditions
Vibration Tested according to IEC 60068-2-6, 10 cycles
Operation
1 , 2
10 Hz to 58 Hz: 0.0375 mm, 58 Hz to 500 Hz: 4.9 m/s
2
Storage/transport 5 Hz to 9 Hz: 3.5 mm, 9 Hz to 500 Hz: 9.8 m/s
2
Resistance to shock Tested according to IEC 60068-2-27, IEC 60068-2-29
Operation
1 , 2
Half-sine: 50 m/s
2
, 30 ms, 100 shocks per axis
Storage/transport Half-sine: 250 m/s
2
, 6 ms, 1000 shocks per axis
Special features
Quality assurance to ISO 9001
Motherboard
Chipset Mobile Intel® QM57 Express Chipset
RAID (on-board) Mobile Intel® QM57 Express (5 Series SATA RAID Controller)
Processor
 Intel® Core™ i3-330E (2.13 GHz, 1066 MT/sec FSB,
3 MB cache, EM64T, VT, 2 cores / 4 threads)
 Intel® Core™ i5-520E (2.4 GHz Turbo Boost,
1066 MT/sec FSB, 3 MB cache, EM64T, VT, 2 cores / 4
threads), AMT
 Intel® Core™ i7-610E, 2.53 GHz Turbo Boost,
1066MT/sec FSB, 4 MB cache, EM64T, VT, 2 cores /
4 threads), AMT

Siemens Simatic IPC647C Specifications

General

Brand	Siemens
Model	Simatic IPC647C
Category	Industrial PC
Language	English