EasyManua.ls Logo

Siemens SIMATIC Rack PC 840 - Page 181

Siemens SIMATIC Rack PC 840
212 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical Specifications
B-3
SIMATIC Rack PC 840 Manual
A5E00104826-03
Ambient Conditions
Temperature
operation
storage/transport
gradient
tested to DIN EN 60068-2-2:1994,
DIN IEC 60068-2-1,DIN IEC 60068-2-14,
+ 5°C to +50°C (see chapter C Retrofit Notes)
- 20°C to +60°C
(Max. speed of temperature change 10
o
C/h (50
o
F/h)
condensation not permitted)
Relative humidity
operation
storage/transport
gradient
tested to DIN IEC 60068-2-3, DIN IEC 60068-2-30,DIN IEC
60068-2-56
5% to 80% at 25°C (no condensation)
5% to 95% at 25°C (no condensation)
(Max. speed of temperature change 10
o
C/h (50
o
F/h)
condensation not permitted)
Mechanical Specifications
Vibration
operation *
1
, *3
storage/transport
tested to DIN IEC 60068-2-6
10 to 58 Hz: 0.0375 mm, 58 to 500 Hz: 5 m/s
2
5 to 9 Hz: 3.5 mm, 9 to 500 Hz: 9.8 m/s
2
Shock
operation *
2
, *
3
storage/transport
tested to DIN IEC 60068-2-29
50 m/s
2
, 30 ms,
250 m/s
2
, 6 ms
Special Features
Quality assurance to ISO 9001
Motherboard
Processor Intel Pentium III / Celeron (type: FCPGA 370),
(see order documentation)
Internal processor cache 2x 16KB first level, 128/256 KB second level, dependent on
the processor used
Main memory 3 slots
maximum 512 MB SDRAM,
memory configuration (see order documentation)
2nd Level Cache Processor internal
Free expansion slots 7 PCI (max 265 mm long)
5 ISA
a maximum of 10 modules simultaneously
max. permissible current input per
ISA slot
max. permissible current input per
PCI slot
in total (all slots)
5 V 2 A, 12 V 0.3 A, -12 V 0.05 A
5 V 2 A or 3.3 V 2 A, 12 V 0.3 A, -12 V 0.05 A
90 W total power consumption may not be exceeded
Drives
Floppy disk drive 3.5” (1.44 MB)
Hard disk drive 3.5” EIDE, UDMA33/66/100, SCSI, UW
(see order documentation for equipment)
CD-ROM, CR-RW 5,25” EIDE, UDMA33
(see order documentation for equipment)
Graphics
Graphics controller SXGA LCD controller on the AGP bus
ATI Rage Mobility 128
Graphics memory 8 MB SDRAM
Resolutions/frequencies/colors CRT: up to 1280x1024/16.7 mill. colors/85 Hz
LCD: up to 1024x768x18 bits
Internal connection for LCD LVDS single chip; single channel

Table of Contents

Other manuals for Siemens SIMATIC Rack PC 840

Related product manuals