Siemens SIMATIC Rack PC 840 - The Boot Sequence Menu

Configuring the SIMATIC Rack PC 840
5-22
SIMATIC Rack PC 840 Manual
A5E00104826-03
5.6 The Boot Sequence Menu
This menu allows you to prioritize the boot devices.
PhoenixBIOS Setup Utility
Item Specific Help
ESC Exit
Select Item
Select Menu
+ / –
Select
Change Values
Sub-Menu
F9
F10
Setup Defaults
Save and Exit
+Hard Drive
CD–ROM Drive
Intel.Boot Agent 1)
+Removable Devices
Enter
Help
F1
Advanced Security Version ExitMain Power
Keys used to view or
configure devices:
<Enter> expands or
collapses devices with
a + or –
<Ctrl+Enter> expands
all
<+> and <–> moves
the device up or down.
Boot Sequence
Figure 5-16 The ”Boot Sequence” Menu
1) Intel Boot Agent is only displayed if, beforehand, the LAN Remote Boot
function has been set to “Enabled” in the hardware options menu.
This menu lists the boot devices in groups. The group with the highest priority is at
the top. The procedure for changing the sequence is as follows:
Use the ↑↓. keys to select a group and the + or – keys to move the group to its
new position in the sequence.
Note
During booting the boot drive can be selected with the ESC key.