Siemens SIMATIC Rack PC 840 - Page 35

Setting Up and Operating the SIMATIC Rack PC 840
3-5
SIMATIC Rack PC 840 Manual
A5E00104826-03
33±T3
1.299±T3
35±T3
1.377±T3
355.6±T1
14±T1
209.6±T1
8.251±T1
127±T1
5±T1
100±T1
3.937±T1
100±T1
3.937±T1
100±T1
3.937±T1
Dimensions for telescopic
rails by the company Rittal
type 3659
Dimensions for telescopic
rails by the company Schroff
type 69000-122
Dimensions:
mm
inch
72.6±T2
2.858±T2
88.5±T2
3.484±T2
0.1 mm
0.004 inch
T1=tolerance of ±
0.3 mm
0.01 inch
T2=tolerance of ±
0.5 mm
0.02 inch
T3=tolerance of ±
Figure 3-2 Dimensions for using telescopic rails
Technical Specifications of the Telescopic Rails
Load per pair minimum 30 kg
Pull-out length for complete pull–out minimum 470 mm
Rail thickness maximum 9,7 mm
Fixing screws M5 x 6mm
The fiixing screw of the telescopic rail should not go beyond a maximum of 5 mm
into the housing.