Siemens SIMATIC Rack PC 840 - Page 98

Configuring the SIMATIC Rack PC 840
5-28
SIMATIC Rack PC 840 Manual
A5E00104826-03
System Parameter Your EntriesDefault Settings
PCI IRQ Line 1 Auto Select
PCI IRQ Line 2 Auto Select
PCI IRQ Line 3 Auto Select
PCI IRQ Line 4 Auto Select
Floppy disk controller Enabled
Large Disk Access Mode DOS
Local Bus IDE adapter Primary& Secondary
Memory Gap at 15 Mbyte Disabled
Default Primary Video Adapter AGP
Security
Supervisor Password Is Disabled
User Password Is Disabled
Set Supervisor Password Enter
Set User Password Enter
Password on boot Disabled
Fixed disk boot sector Normal
Diskette Access Supervisor
Power
APM Enabled
Power Savings Disabled
Hard Disk Timeout Disabled
Resume On Time off
Resume Time
After Power Failure Last State
Boot Sequence
Diskette Drive
Removable Devices
Hard Drive
ATAPI CD-ROM Drive
Intel.Boot Agent
Version
SIMATIC Rack PC 840
BIOS Version
BIOS Number
MPI/DP Firmware
CPU Type PIII
CPU Speed xxxx MHz
CPU ID 0683
Code Revision 0010