Siemens SIMATIC RF185C - Page 128

Programming via OPC UA
10.2 OPC UA variables
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
128 Operating Instructions, 04/2020, C79000-G8976-C512-03
Table 10- 13 Command
Path
/Root/Objects/DeviceSet/Readpoint_x/RuntimeParameters/Diagn
osis/LastAccess/Command
Data type
String
Access
R
Description
Diagnostics on the last transponder access
Outputs the command executed during the last transponder
access operation.
The prerequisite is that the "Parallel" or "Diagnostics" option is
set in the WBM.
Possible values
Depending on the client interface used:
PNIO, PB, EIB
(Ident profile):
• INVENTORY
• WRITE-ID
• KILL-TAG
• LOCK-TAG-BANK
• PHYSICAL-READ
• PHYSICAL-WRITE
• FORMAT
• TAG-STATUS
• GET
• PUT
• NEXT
PNIO, PB (FB 45):
• WRITE
• READ
• INIT
• MDS-STATUS
OPC UA:
• Scan
• ReadTag
• WriteTag
• KillTag
• LockTag
• SetTagPassword
• Read
• Write
WBM, XML:
• readTagIDs
• writeTagID
• readTagMemory
• writeTagMemory
• killTag
• lockTagBank
• getTagStatus
READPOINT:
• Observed
--