Siemens SIMATIC S7-1200

Introducing the powerful and flexible S7-1200
1.2 Expansion capability of the CPU
Easy Book
Manual, 03/2014, A5E02486774-AF
19
Table 1- 4 Analog signal modules and signal boards
Type
Input only
Output only
Combination In/Out
③ analog SB
• 1 x 12 bit Analog In
• 1 x 16 bit RTD
• 1 x 16 bit Thermocouple
• 1 x Analog Out
-
④ analog SM
• 4 x Analog In
• 4 x Analog In x 16 bit
• 8 x Analog In
• Thermocouple:
– 4 x 16 bit TC
– 8 x 16 bit TC
• RTD:
– 4 x 16 bit RTD
– 8 x 16 bit RTD
• 2 x Analog Out
• 4 x Analog Out
• 4 x Analog In/2 x Analog Out
Table 1- 5 Communication interfaces
Module
Type
Description
① Communication module (CM)
RS232
Full-duplex
RS422/485 Full-duplex (RS422)
Half-duplex (RS485)
PROFIBUS Master
DPV1
PROFIBUS Slave
DPV1
AS-i Master (CM 1243-2)
AS-Interface
①
Communication processor (CP)
Modem connectivity GPRS
③
Communication board (CB)
RS485 Half-duplex
TeleService
1
TS Adapter IE Basic
Connection to CPU
TS Adapter GSM
GSM/GPRS
TS Adapter Modem
Modem
TS Adapter ISDN
ISDN
TS Adapter RS232 RS232
1
The TS Adapter IE Basic allows you to connect various communication interfaces to the PROFINET port of the CPU
using an Ethernet cable. You can install up to 3 TS adapter modules onto the TS Adapter IE Basic.