Easy to use the online tools
11.14 Downloading an IP address to an online CPU
Easy Book
270 Manual, 03/2014, A5E02486774-AF
Downloading an IP address to an online CPU
To assign an IP address, you must perform the following tasks:
Configure the IP
address for the CPU
(Page 80).
Save and download the
configuration to the
CPU.
The IP address and subnet mask for the CPU must be compatible with the IP address and
subnet mask of the programming device. Consult your network specialist for the IP address
and subnet mask for your CPU.
the CPU has not been previously configured, you can also
use "Online access" to set the IP address.
An IP address that you have downloaded with the device
configuration will not be lost on a power cycle of the PLC.
After you have downloaded the device configuration with the IP address, you can see the IP
address under the "Online access" folder.
To Next Page
Loading...
