Siemens SIMATIC S7-1200

Easy to create the device configuration
5.6 Configuring the IP address of the CPU
Easy Book
Manual, 03/2014, A5E02486774-AF
81
The "Properties" window displays
the settings for the programming
device.
After determining the IP address
and subnet mask for the CPU,
enter the IP address for the CPU
and for the router (if applicable).
Refer to the
S7-1200 System
Manual
for more information.
After completing the configuration,
download the project to the CPU.
The IP addresses for the CPU and
for the router (if applicable) are
configured when you download the
project.