EasyManua.ls Logo

Siemens SIMATIC S7 FH - A.3 Check List of the Certified F-Blocks

Siemens SIMATIC S7 FH
354 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Check Lists
Fail-Safe Systems
A5E00085588-03
A-7
A.3 Check List of the Certified F-Blocks
Only the F-Blocks listed below can be used to program the F user program. These
blocks are fail-safe and certified.
Please compare the signature and initial value signature of these F-Blocks with
those in the current Annex 1 of the report for the "Safety-Related Programmable
Systems SIMATIC S7-400F and S7-400FH" certificate.
If the initial value signature is not in the printout of the safety program, the
signature must be compared with the CRC in Revision 1.0 of Annex 1 and checked
in SIMATIC Manager to see if the F FB is Version 1.0.
Block
Name
Block
Number
Function Check
Driver Blocks
F_M_AI6 FB 383 F module driver for 6-channel analog input
F_M_DI8 FB 384 F module driver for 8-channel digital input
F_M_DI24 FB 385 F module driver for 24-channel digital input
F_M_DO8 FB 388 F module driver for 8-channel digital output
F_M_DO10 FB 386 F module driver for 10-channel digital output
F_CH_DI FB 377 F channel driver for digital input
F_CH_DO FB 378 F channel driver for digital output
F_CH_AI FB 379 F channel driver for analog input
Further Blocks (in Alphabetical Order)
F_1oo2_R FB 457 1 out of 2 analog voter block (Block Type)
F_2OUT3 FB 305 Binary selection 2 out of 3
F_2oo3_R FB 456 2 out of 3 analog voter block (Bock Type)
F_ABS_R FB 325 Calculation of the absolute value
F_ADD_R FB 321 Addition of two REAL values
F_AND4 FB 301 AND logic operation on four inputs
F_AVEX_R FB 331 Mean value of a maximum of nine REAL
values
F_BO_FBO FC 303 Convert from BOOL to F_BOOL
F_CTUD FB 341 Up and down counter
F_CYC_CO FB 395 F cycle time monitoring
F_DIV_R FB 324 Division of two REAL values
F_F_TRIG FB 347 Detection of the falling edge
F_FBO_BO FC 363 Convert from F_BOOL to BOOL
F_FI_I FC 305 Convert from F_INT to INT
F_FR_FI FB 461 Convert from F_REAL to F_INT
F_FR_R FC 304 Convert from F_REAL to REAL
F_FTI_TI FC 306 Convert from F_TIME to TIME
F_I_FI FB 369 Converts from INT to F_INT
F_LIM_HL FB 314
Monitoring of upper limit value violation of a
REAL value

Table of Contents

Related product manuals