Siemens Simatic VS 710

SIMATIC VS710
Quick Reference Guide
8
SIMATIC VS 710
A5E00032597-02
Mounting Bracket
The mounting bracket snaps into place on top of the back panel and is
screwed tight on the front panel, leaving the other three sides of the casing
free for other mounting alternatives.
M 4 screws
Mounting bracket
set screw
1)
Figure 5 VS 710 with Mounting Bracket Attached
Lens Socket
The lens socket fits all commercial C-mount standard lenses.
1)
Note: the set screw on the lens socket is meant for factory settings
only. A readjustment of the lens position is not allowed.