Siemens Simatic VS 710 User Manual

SIMATIC VS710
Quick Reference Guide
16
SIMATIC VS 710
A5E00032597-02
2.7 VGA Connector Pinout
You can connect a monitor to your VS 710 using the VGA socket
connector. The VGA socket connector has the following pinout:
54321
10
6
15141211 13
15-pin subminiature D connector
Figure 14
VGA Socket Connector
Pin Signal
1 Red
2 Green
3 Blue
4 Not assigned
5 Digital ground
6 Digital ground
7 Digital ground
8 Digital ground
9 Not assigned
10 Digital ground
11 Not assigned
12 Not assigned
13 Horizontal sync
14 Vertical sync
15 Not assigned
Shield On connector casing
Note
Connect your VGA monitor with the standard VGA cable.
The distance between monitor and VS 710 should not exceed 2.5 m.

Siemens Simatic VS 710 Specifications

General

Brand	Siemens
Model	Simatic VS 710
Category	Computer Hardware
Language	English