Siemens SIMOCODE pro V EIP - Control Functions

Overview of functions
5.4 Control functions
SIMOCODE pro
System Manual, 05/2019, A5E40507475002A/RS-AD/004
53
5.4 Control functions
Depending on the device series, the following parameterizable control functions are
available:
Table 5- 1 Control functions
Control function
SIMOCODE pro
BP
GP
HP
C
S
V PN GP
V PB, V MR, V PN, V EIP
Overload relay
✓
✓
✓
✓
Direct starter (direct-on-line starter)
✓
✓
✓
✓
Reversing starter
✓
✓
✓
✓
Molded case circuit breaker (MCCB) ✓ ✓ ✓ ✓
Star-delta starter
—
✓
✓
✓
Star-delta reversing starter — — — ✓
Dahlander starter, combinable with
reversing starter
— — — ✓
Pole-changing starter, combinable with
reversing starter
— — — ✓
Solenoid valve
—
—
—
✓
Positioner
—
—
—
✓
Soft starter
—
✓
✓
✓
Soft starter with reversing contactor
—
—
—
✓
All the necessary protection functions and interlocks are already available and can be flexibly
adapted and expanded.
For a detailed description of the individual control functions: See Chapter "Motor control" in
the manual Parameterizing SIMOCODE pro
(https://support.industry.siemens.com/cs/ww/en/view/109743958
).