Siemens SIMOCODE pro V EIP User Manual

Overview of functions
5.8 Operating, service and diagnostics data
SIMOCODE pro
60 System Manual, 05/2019, A5E40507475002A/RS-AD/004
Service data
Among other things, SIMOCODE pro provides the following relevant data for maintenance:
● Number of motor operating hours, also resettable
● Motor stop times, also resettable
● Number of motor starts, also resettable
● Number of permissible starts remaining
● Number of overload trips, also resettable
● Feeder power consumption in kWh, also resettable
2)
● Internal feeder-related comments stored in the device, e.g. information regarding
maintenance events, etc.
● Safety-related tripping monitoring in h, also resettable
5)
Diagnostics data
● Numerous detailed early warning and fault messages, also for further processing in the
device or in the control system
● Device-internal error logging with time stamp
● Value of the last trip current
● Feedback faults (e.g. no current flow in the main circuit after switch-on command), etc.
● "Local" and "PROFIsafe" diagnostic messages
1) When using SIMOCODE pro V High Performance basic units with current / voltage
measuring module
2) When using SIMOCODE pro V PB basic units from version *E03* current / voltage
measuring module
3) When using the SIMOCODE pro V basic units with the 3UF77 temperature module or the
SIMOCODE pro S basic unit with multifunction module
4) When using SIMOCODE pro V High Performance basic units with analog module
5) When using SIMOCODE pro V High Performance basic units together with DM-F fail-safe
digital module
6) When using the SIMOCODE pro V basic units with the 3UF7510 ground-fault module or
the SIMOCODE pro S basic unit with a multifunction module and 3UL23 residual current
transformer
7) 2nd generation current / voltage measuring module necessary

Siemens SIMOCODE pro V EIP Specifications

General

Brand	Siemens
Model	SIMOCODE pro V EIP
Category	Control Unit
Language	English