Siemens SIMOCODE pro V EIP User Manual

An overview of system components
SIMOCODE pro
76 System Manual, 05/2019, A5E40507475002A/RS-AD/004
Accessories
Selection and ordering data: See also Catalog IC10 (https://www.siemens.com/ic10).
Table 7- 2 System components, accessories that can be connected
System component,
accessory
MLFB
Diagram
for
pro C
for
pro S
for V
PN GP
for pro
V PB
for
pro V MB
RTU
for
pro V
PN
for
pro V
EIP
Connecting cable
for connecting the basic unit, current
measuring module, current/voltage
measuring module, operator panel, and
decoupling module
✓ ✓ ✓ ✓ ✓ ✓ ✓
0.025 m ribbon
0.1 m ribbon
0.15 m ribbon
0.3 m ribbon
0.5 m ribbon
0.5 m round
1.0 m round
1.5 m round
2.5 m round
3UF7930-0AA00-0
3UF7931-0AA00-0
3UF7935-0AA00-0
3UF7932-0AA00-0
3UF7932-0BA00-0
3UF7937-0BA00-0
.........
3UF7933-0BA00-0
Interface covers
For covering unused
system interfaces
3UF7950-0AA00-0
(light gray)
3RA6936-
0B (titanium gray)
✓ ✓ ✓ ✓ ✓ ✓ ✓
Memory module
Backup of the full set of
parameters of a
SIMOCODE pro
system when the
device is replaced. If a
device is replaced,
parameter transfer
without PC.
3UF7900-0AA00-0
(light gray)
3UF7900-0AA01-0
(titanium gray)
3UF7901-0AA00-0
(light gray)
3UF7901-0AA01-0
(titanium gray)
✓
✓
—
—
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
1)
✓
1)
✓
✓
✓
✓
—
—
✓
✓
—
—
✓
✓
Initialization module
Storage and
initialization of device
parameters and device
addressing in motor
control centers.
3UF7902-0AA00-0 — ✓ ✓ ✓
1)
✓ ✓ ✓
Y connecting cable
Connection of the basic unit and current or
current/voltage measuring module with the
initialization module when using the
initialization module
— ✓ ✓ ✓ ✓ ✓ ✓

Siemens SIMOCODE pro V EIP Specifications

General

Brand	Siemens
Model	SIMOCODE pro V EIP
Category	Control Unit
Language	English